Spray Foam Services

Spray Foam Insulation Services

Estimate Your Spray Foam Project

Getting started is easy. Watch the complete 3-minute demo to see how our Spray Foam Estimator works from start to finish. If you only need help with a specific step, we’ve also broken the demo into short chapter videos so you can quickly find the information you’re looking for.

When you’re ready, launch the Spray Foam Estimator to enter your project details and receive an instant estimate. Once submitted, a Symmtrex specialist will review your information, verify your project details, and provide a customized quote tailored to your needs.

<<Launch The Spray Foam Estimator>>

 

Watch The Complete Demo or Jump To A Specific Step

Watch The Full Demonstration
Watch Full Demonstration of Symmtrex Spray Foam Estimator Tool
Introduction To Symmtrex Spray Foam Estimator
Getting started with our spray foam estimator
Choosing Your Building Type
Choosing Your Building Type for Spray Foam Estimator
Closed Cell Spray Foam
 
Closed Cell Spray Foam Estimate
Open Cell Spray Foam
Open Cell Foam Spray Foam Estimator Demo
How To Calculate Wall Area
How To Calculate Your Wall Area
Enter Square Footage
Entering Square Footage in Spray Foam Estimator
R-Value of Spray Foam
R-Value Calculation for Spray Foam Insulation
Roof Deck Area Calculation
Calculating Roof Area for Symmtrex Spray Foam Estimate
Get Your Instant Estimate
Last Step For Spray Foam Estimator Tool
Important Information
Important Considerations For Your Spray Foam Estimate
Finalizing Your Quote
Finalizing Your Quote For Symmtrex Spray Foam

Ready to calculate your project?


Spray Foam Estimator

Symmtrex / Spray Foam Estimator
Building Type
Wall Area to Insulate
Total sq ft of wall surface, length multiplied by wall height.
sq ft
Roof Deck Area (optional)
Best guess sq ft of roof deck underside. Leave blank if walls only.
sq ft
Select building type and enter square footage above.
Get Your Estimate
Enter your info below and we will show your estimate range instantly.
Name
Email
Phone
A Symmtrex specialist will be reaching out via phone or email to confirm measurements in order to send a finalized quote with our recommendation in addition to your defined options.
Estimate only. Range reflects material and labor variables. Final price based on site conditions, travel, equipment, access, substrate condition, ventilation, masking, prep, and field verification. A written proposal follows site assessment.
Estimates for budgeting only · Final pricing confirmed after site assessment

Energy Efficiency Meets Steel Strength

spray foam insulationSymmtrex now offers professional spray foam insulation services to complement our light steel framing systems. Whether your project requires open-cell for soundproofing and full cavity fill, or closed-cell for high R-value and moisture control, our certified team delivers code-compliant, high-performance solutions for residential, commercial, and industrial builds across North Texas.

What Is Spray Foam Insulation?

Spray foam insulation is applied as a liquid and expands to create a continuous barrier against air leaks, drafts, and moisture. Compared to fiberglass or cellulose, it delivers higher performance, longer life, and seamless integration with steel framing systems.


Types of Spray Foam We Offer

Open-Cell Foam

  • Density: ~0.5 lbs/ft³ (lightweight, softer texture).

  • R-Value: ~R-3.6 to R-4.5 per inch.

  • Best For: Interior walls, ceilings, attics, and soundproofing.

  • Advantages:

    • Expands to fill entire cavities for air sealing.

    • Excellent noise reduction.

    • Cost-effective insulation option.

  • Limitations: Not a vapor barrier; may require additional protection in cold or high-moisture climates.

Closed-Cell Foam

  • Density: ~2.0 lbs/ft³ (rigid, durable).

  • R-Value: ~R-6.0 to R-7.4 per inch.

  • Best For: Exterior walls, roof decks, foundations, crawlspaces, and high-performance builds.

  • Advantages:

    • Superior thermal performance in limited space.

    • Acts as a moisture barrier, preventing mold and condensation.

    • Adds structural strength (up to 300% increased racking resistance).

    • Long-lasting (20–30+ years).

  • Limitations: Higher upfront cost compared to open-cell.


Our Installation Process

Insulating with spray foam1. Pre-Job Prep

  • Full site inspection and protection of non-target surfaces.
  • Substrates cleaned, dry, and debris-free.

2. Environmental Checks

  • Temperature and humidity verified for proper curing.
  • Primers applied to steel or masonry if required.

3. Foam Application

  • Open-cell: sprayed in lifts up to 4–6 inches.
  • Closed-cell: sprayed in 1–2 inch lifts for controlled curing.
  • Typical installs:
    • Walls: 2–3” (closed-cell) or 3.5” (open-cell).
    • Roof decks/attics: 3–10” depending on type and code.
    • Crawlspaces/foundations: 2–4” closed-cell.

4. Performance & Finishing

  • Continuous air barrier, consistent thickness.
  • Trimmed flush and prepared for drywall or finishing.
  • Code-compliant fire and ignition barriers installed.

5. Quality Control & Cleanup

  • Coverage checked for voids, adhesion, and R-value compliance.
  • Workspace cleaned and made ready for the next phase of construction.

Powered by Alchatek

Where Spray Foam Excels

  • Residential & commercial wall cavities

  • Attics, roof decks, and crawlspaces

  • Foundations and rim joists

  • Soundproofing partitions

  • High-performance and energy-efficient builds

Why Symmtrex?

Unlike traditional spray foam contractors, Symmtrex integrates insulation into the entire building system. From steel framing to energy efficiency, our expertise ensures spray foam is applied to meet performance goals, code requirements, and project budgets.

Get Started Today

Upgrade your project with the combined strength of light steel framing + spray foam insulation. Contact Symmtrex for a consultation today.

Start Typing